With 20 years experience, Hongtai Alloy is your trusted source for quality industrial silicon carbide sic heating element for furnace as one of the leading suppliers of various heaters in China. Providing you with the most competitive price, we welcome you to buy the heater from our factory.
Product Description
Manufactured from high-purity recrystallized green silicon carbide, the Industrial Silicon Carbide SiC Heating Element For Furnace delivers intense, uniform radiant thermal energy where metallic resistance alloys reach their melting limits. Each element consists of a high-resistance central heating section (hot zone) seamlessly bonded or reaction-sintered to low-resistance cold ends, minimizing heat loss through furnace refractory walls. Terminated with aluminum-metallized contact tips for secure braided aluminum strap connections, these rigid ceramic elements are available in straight rod (ED/DB), U-shaped, W-shaped, and single/double spiral geometries to match horizontal or vertical furnace layouts.

Data Sheets
| Parameter | Specification |
| Model / Part Number | HT-SIC-FURNACE-1600 |
| Max Element Surface Temp | Up to 1600°C (2912°F) in clean oxidizing air |
| Typical Furnace Chamber Temp | 600°C to 1500°C (Depending on atmosphere and watt loading) |
| Element Geometries | Straight Rod (ED / Dumbbell DB), U-Type, W-Type (3-Phase), Spiral (SG / DG) |
| Core Material | High-purity recrystallized alpha-Silicon Carbide ($\alpha$-SiC) |
| Cold End Construction | Low-resistance silicon-impregnated cold ends with aluminum-sprayed tips |
| Standard Diameter Range | 8 mm to 54 mm (Custom hot zone & cold end lengths available) |
| Resistance Tolerance | ±10% (Matched resistance sets available for series/parallel banks) |
| Recommended Power Supply | SCR / Thyristor phase-angle controller or multi-tap step-down transformer |
| Mounting Orientation | Horizontal or vertical installation through refractory ceramic sleeves |

Features
Extreme High-Temperature Capability: Operates reliably at element temperatures up to 1600°C in air, outperforming standard FeCrAl and NiCr metallic elements in high-temperature sintering and firing applications.
High Radiant Heat Flux: Delivers superior thermal radiation efficiency and rapid furnace heat-up rates without sagging or creep deformation under high thermal loads.
Low-Resistance Metallized Cold Ends: Impregnated cold sections reduce power dissipation inside furnace insulation walls, while aluminum-coated terminal ends ensure low contact resistance with braided straps.
Versatile Structural Configurations: Available in straight dumbbell rods, single-end U and W shapes, and slotted spirals to accommodate single-sided wiring or tight furnace chamber clearances.
Matched Resistance Grouping: Elements are measured and resistance-matched at the factory to ensure balanced current sharing and uniform temperature distribution across multi-element furnace zones.
Applications & Engineering Guidelines
High-Temperature Thermal Processing: Widely deployed in powder metallurgy sintering furnaces, technical ceramic and ferrite kilns, laboratory box and tube furnaces, glass annealing lehrs, and aluminum holding furnaces.
Resistance Aging & Power Compensation: Silicon carbide elements gradually increase in electrical resistance over prolonged high-temperature service due to slow oxidation. Design power systems with a SCR/thyristor controller or multi-tap transformer (typically offering a 1.5x to 2.0x voltage reserve) to maintain full kilowatt output throughout element life.
Atmosphere & Chemical Compatibility: Maximum allowable operating temperature depends heavily on furnace atmosphere. While 1500°C–1600°C is achievable in dry air, reducing atmospheres (hydrogen, cracked ammonia), vacuum, or alkali/halide vapors lower maximum temperature limits and accelerate surface reaction.
Mechanical Mounting & Expansion Clearance: SiC is a rigid ceramic material susceptible to mechanical shock. Install elements through oversized ceramic fiber sleeves to allow free axial thermal expansion, and use flexible braided aluminum straps so terminal clamps never exert bending stress on the cold ends.
Company profile
Yancheng Hongtai Alloy Electric Apparatus Co., Ltd. is a professional heating element manufacturer established in 2008, specializing in rod heaters, band heaters, and infrared heaters. The company employs 10 experienced engineers and uses advanced machinery from Taiwan, Japan, and Germany. It holds CE and ROHS certifications and adheres to ISO 9001 ,CQC,CE,ROHS certifications standards for quality control.
Main products : cartridge heater,Tubular heater, Flexible heater, Infrared heater,silicone heater ,thermocouple, heating element,Plate Heater and other heating products. The factory introduced advanced automatic control system and online quality,inspection system to ensure the stability and reliability of product quality.





Hot Tags: industrial silicon carbide sic heating element for furnace, China, suppliers, manufacturers, factory, wholesale, price
