molybdenum-disilicide-mosi2-heating-rod
MoSi2 Heating Element's installation:
The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the "U"-shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector can’t be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken.
(our suggestion: please choose the specialize power connector provided by our company) The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top can’t be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick. The Dia.6 element can’t be used of 170A for a long time. The Dia.9 element can’t be used of 300A for a long time.
The standard sizes of MoSi2 heating elements are shown below (standard sizes for both UT-1800 and UT-1700 grade heating elements). The most common shapes are a straight terminal and a 90 degree bent U-Shape.
M1700 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1800 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
Quality Products
Excellent High Temperature and Cycling Properties
Performance Consistency
Long Life
Fast Delivery
Express Orders can be Delivered in 2 to 3 Days
We work with you!
Low Discount Prices
Shop and Compare
Save up to 50% or Better!
Satisfaction Guaranteed
Your Complete Satisfaction is Very Important to Us!
Hot Tags: molybdenum disilicide mosi2 heating rod, China, suppliers, manufacturers, factory, wholesale, price
