nozzle band heaters "COIL TYPE" are capable of performance under the most adverse conditions. Highly recommended for processing high temperature resins to eliminate premature failures due to burn out/ process material leakage.
Heat transfer is based on conduction as well as on radiation principle, which not only improves the thermal efficiency but easy to assemble on nozzles as no pressure on heating surface is essential. Even unskilled operator can fit the heater with no risk of failure of the heater.
Coil Type Nozzle Heaters are specially designed to prevent the failures of heaters against the leakage and contamination of plastic material at nozzle position. This heater can meet the higher temperature requirement prior to moulding at nozzle position.
| DESCRIPTION | MODEL STANDARD | MODEL BRASS LINING |
| Sheath Material | SS / Incoloy | SS / Incoloy |
| Insert | - | Brass |
| Wattages | 10W/ Sq cm | 10W/ Sq cm |
| Voltage | 220/230/240 V | 220/230/240 V |
| Diameter | Minimum 25 mm | Minimum 25 mm |
| Length | Minimum 25 mm | Minimum 25 mm |
| Thickness | 10 mm | 12 mm |
| Working Temp | 400° C | 500° C |
| Provision of TC & TC hole | Yes | Yes |
Hot Tags: coil type nozzle heaters, China, suppliers, manufacturers, factory, wholesale, price
