With 20 years experience, Hongtai Alloy is your trusted source for quality l shaped ptfe teflon immersion heater for plating tank as one of the leading suppliers of various heaters in China. Providing you with the most competitive price, we welcome you to buy the heater from our factory.
Product Description
Designed for harsh corrosive environments where metallic sheaths rapidly degrade, the L Shaped PTFE Teflon Immersion Heater For Plating Tank features a heavy-wall virgin fluoropolymer (PTFE) sleeve extruded over a grounded stainless steel tubular heating core. Its L-shaped geometry allows the vertical riser leg to hang securely over the tank lip while positioning the horizontal heating section along the tank floor for uniform convective thermal distribution from the bottom up. Equipped with a vapor-tight polypropylene terminal junction box, chemical-resistant flexible conduit, and integrated thermal overheat protection, this heater delivers long-term dielectric safety and chemical inertness across demanding plating lines.

Data Sheets
| Parameter | Specification |
| Model / Part Number | HT-PTFE-L-PLATING |
| Operating Voltage | 110V AC / 220V AC / 380V AC / 415V AC (1-Phase or 3-Phase) |
| Power Rating | 1 kW to 12 kW (Custom engineered per bath volume and heat-up time) |
| Wattage Tolerance | +5% / -10% (Per industrial manufacturing standards) |
| Element Geometry | L-shaped bottom-heating profile (Vertical cold riser + horizontal hot zone) |
| Outer Jacket Material | Heavy-wall virgin PTFE (Polytetrafluoroethylene / Teflon) fluoropolymer |
| Internal Core Sheath | Grounded SUS304 / SUS316 Stainless Steel tubular element |
| Max Bath Operating Temp | Up to 100°C (212°F) in aqueous acid and alkaline plating solutions |
| Design Watt Density | Low surface loading (~1.5 W/cm² / 10 W/in²) for extended fluoropolymer life |
| Terminal Enclosure | Vapor-tight, flame-retardant Polypropylene (PP) head with flexible lead sleeve |
| Integrated Safety Options | Built-in thermal fuse cutoff, PT100 / Type J/K sensor well, and PTFE guard |
| Insulation Resistance | Cold insulation resistance ≥100MΩ at 500V DC |
| Dielectric Withstand | 1500V AC / 1 min (Cold state) |

Features
- Universal Chemical Inertness: Heavy-wall PTFE outer cladding resists virtually all strong acids, alkalis, and oxidizing plating chemistries-including chromic, sulfuric, hydrochloric, nitric, and hydrofluoric acid baths.
- Bottom-Up Convective Heating: The horizontal L-shaped hot zone rests near the tank floor, promoting natural upward thermal convection that eliminates temperature stratification throughout deep plating tanks.
- Grounded Metal Core Safety: Unlike ungrounded plastic-tube heaters, the internal metal tubular sheath provides continuous electrical grounding and mechanical rigidity inside the fluoropolymer jacket.
- Vapor-Tight Terminal Head: A sealed, chemical-resistant polypropylene junction box and flexible fluoropolymer-sheathed leads protect electrical connections against corrosive tank fumes and splashes.
- Custom Tank Dimensions: Vertical riser height, horizontal leg length, power rating, voltage, and optional perforated PTFE protective guards are custom built to match exact tank depth and rack clearances.
Applications & Engineering Guidelines
- Surface Finishing & Chemical Baths: Widely deployed in electroplating (nickel, chrome, copper, zinc, precious metals), electroless plating, PCB etching lines, acid pickling tanks, and deionized water rinses.
- Mandatory Submersion & Dry-Fire Prevention: Because PTFE has low thermal conductivity and softens at elevated temperatures, the entire horizontal heating section and lower riser transition must remain completely submerged. Pair the heater with a liquid-level float switch and an integrated thermal cutoff.
- Sludge & Sediment Clearance: Support the horizontal heating leg on non-conductive PTFE feet or standoff brackets at least 50 mm to 75 mm above the tank bottom so anode sludge and precipitates cannot bury the element and trap heat.
- Mechanical Impact Protection: Avoid dropping metal plating racks, anodes, or workpieces onto the fluoropolymer sheath. Install an optional slotted PTFE guard cage in high-traffic manual or automated hoist tanks.
Company profile
Yancheng Hongtai Alloy Electric Apparatus Co., Ltd. is a professional heating element manufacturer established in 2008, specializing in rod heaters, band heaters, and infrared heaters. The company employs 10 experienced engineers and uses advanced machinery from Taiwan, Japan, and Germany. It holds CE and ROHS certifications and adheres to ISO 9001 ,CQC,CE,ROHS certifications standards for quality control.
Main products : cartridge heater,Tubular heater, Flexible heater, Infrared heater,silicone heater ,thermocouple, heating element,Plate Heater and other heating products. The factory introduced advanced automatic control system and online quality,inspection system to ensure the stability and reliability of product quality.





Hot Tags: l shaped ptfe teflon immersion heater for plating tank, China, suppliers, manufacturers, factory, wholesale, price

