Corrosion Resistant PTFE Coil Immersion Heater 220V 380V

Corrosion Resistant PTFE Coil Immersion Heater 220V 380V

This compact, corrosion-resistant PTFE (Teflon) coil immersion heater is engineered specifically for high-efficiency chemical heating in acid etching baths, electroplating vats, anodizing tanks, and aggressive industrial fluid reservoirs where tank floor space is limited.
Send Inquiry
Description

With 20 years experience, Hongtai Alloy is your trusted source for quality corrosion resistant ptfe coil immersion heater 220v 380v as one of the leading suppliers of various heaters in China. Providing you with the most competitive price, we welcome you to buy the heater from our factory.

 

Product Description

Built to withstand severe chemical attack while packing substantial heat-exchange surface area into a tight footprint, the Corrosion Resistant PTFE Coil Immersion Heater 220V 380V utilizes a multi-turn helical fluoropolymer coil construction. A heavy-wall virgin PTFE jacket is seamlessly extruded over a grounded stainless steel tubular heating element, combining complete chemical inertness with structural rigidity and electrical safety. Suspended over the tank rim via vertical cold risers and terminated in a vapor-tight polypropylene junction box, this coiled configuration delivers rapid, uniform convective warming in narrow or deep process vessels without obstructing bottom work zones.

Corrosion Resistant L Shaped PTFE Immersion Heater 380V

Data Sheets

Parameter Specification
Model / Part Number HT-PTFE-COIL-220V380V
Operating Voltage 220V AC / 380V AC (Single-phase or 3-phase; custom ratings available)
Power Rating 1 kW to 9 kW (Custom sized per tank volume and target heat-up cycle)
Wattage Tolerance +5% / -10% (Per industrial manufacturing standards)
Element Geometry Multi-turn helical / spiral coil with straight vertical cold risers
Outer Fluoropolymer Cladding Heavy-wall virgin PTFE (Polytetrafluoroethylene / Teflon)
Internal Tubular Core Grounded SUS304 / SUS316 stainless steel heating element
Max Solution Temperature Up to 100°C (212°F) in aqueous acid and alkaline baths
Surface Watt Loading Low watt density (~1.2–1.5 W/cm²) to prevent fluoropolymer overheating
Terminal Enclosure Vapor-tight Polypropylene (PP) head with flexible fluoropolymer lead sleeve
Safety & Sensor Options Integrated thermal fuse cutoff, PT100 / Type K sensor well, PTFE coil spacers
Insulation Resistance Cold insulation resistance ≥100MΩ at 500V DC
Dielectric Withstand 1500V AC / 1 min (Cold state)

PTFE Coated Heaters

Features

  • Compact Multi-Turn Coil Footprint: Helical winding concentrates extended heating length into a cylindrical profile, making it ideal for side-wall mounting or tight tanks where bottom-laying heaters cannot fit.
  • Broad-Spectrum Acid & Alkali Resistance: Virgin PTFE outer cladding resists virtually all aggressive plating and pickling solutions-including hydrofluoric, sulfuric, hydrochloric, nitric, and chromic acids-without contaminating high-purity baths.
  • Grounded Metallic Core Integrity: Features an internal stainless steel tubular sheath that provides continuous earth grounding and mechanical support, preventing coil sagging during prolonged thermal service.
  • Fume-Sealed Polypropylene Head: Equipped with a chemical-resistant, vapor-tight terminal housing and flexible protective conduit to block corrosive acid mist from reaching electrical connections.
  • Custom Coil Diameter & Riser Length: Coil diameter, turn pitch, active heated height, cold riser length, and optional perforated PTFE bumper guards are engineered to match exact vessel dimensions.

 

Applications & Engineering Guidelines

  • Wet Processing & Chemical Tanks: Widely used in semiconductor wet benches, PCB chemical etching lines, electroplating and anodizing baths, bright-dip tanks, and corrosive chemical storage drums.
  • Coil Pitch & Convective Circulation: Maintain proper spacing between adjacent helical turns (using factory-fitted PTFE spacer combs where required) so heated fluid circulates freely and never traps stagnant vapor pockets between coils.
  • Liquid-Level Interlock Protection: Because fluoropolymers have lower thermal conductivity than bare metals, the entire coiled heating zone and lower cold-leg transition must remain fully submerged during operation. Always pair the heater with a low-level float switch and integrated thermal cutoff.
  • Chemical & Mechanical Precautions: While inert to nearly all industrial acids and bases, PTFE should not be exposed to molten alkali metals or elemental fluorine at elevated temperatures. Install a protective PTFE guard cage if heavy plating racks or baskets are loaded near the coil.

 

Hongtai Heater Factory Manufacturer

  • 20 Years Manufacturing Experience: Hongtai has specialized in designing and manufacturing corrosion-resistant PTFE immersion heaters and industrial heating elements for two decades, providing reliable thermal solutions for surface-finishing equipment.
  • Certified Quality Systems: Hongtai operates under strict ISO quality management standards, performing 100% cold resistance checks, high-voltage dielectric testing, and fluoropolymer jacket integrity inspections before shipment.
  • Production Facility: Hongtai runs a 10,000 m² modern manufacturing plant equipped with fluoropolymer extrusion lines, precision coil-forming fixtures, and dedicated CAD engineering support for custom OEM/ODM chemical heating systems.

Hongtai Heater Factory Company overview

 

Hongtai Heater Factory Certification

Hongtai Heater Factory profile

 

Hongtai Heater Factory Trade show participation

​

Hongtai Heater Factory Packaging shipping specifications

 

Hot Tags: corrosion resistant ptfe coil immersion heater 220v 380v, China, suppliers, manufacturers, factory, wholesale, price