220V 380V Spiral Coil Tubular Heater Element With Thread

220V 380V Spiral Coil Tubular Heater Element With Thread

This cylindrical helical spiral coil tubular heater with threaded bulkhead fittings is engineered for high-efficiency immersion liquid heating, cylindrical vessel warming, and compact process chamber applications across commercial and industrial equipment.
Send Inquiry
Description

With 20 years experience, Hongtai Alloy is your trusted source for quality 220v 380v spiral coil tubular heater element with thread as one of the leading suppliers of various heaters in China. Providing you with the most competitive price, we welcome you to buy the heater from our factory.

 

Product Description

Designed to concentrate substantial heating power into cylindrical vessels, pipes, and compact fluid reservoirs, the 220V 380V Spiral Coil Tubular Heater Element With Thread features a multi-turn helical stainless steel coil terminating in two straight cold-zone legs. Each leg is equipped with a precision-machined threaded hex bulkhead fitting, retaining washer, and locking nut to enable direct, leak-tight through-wall tank mounting. High-purity compacted magnesium oxide insulation and centered NiCr resistance wire ensure uniform radial heat transfer, while moisture-sealed ceramic insulators and threaded terminal studs provide secure electrical termination.

Helical Spiral Tubular Water Oil Heater For Boiler

Data Sheets

Parameter Specification
Model / Part Number HT-SCTH-220V380V-TH
Operating Voltage 220V AC / 380V AC (Custom single- or three-phase ratings available)
Power Rating Custom engineered based on coil diameter, turn count, and medium
Wattage Tolerance +5% / -10% (Per industrial manufacturing standards)
Element Geometry Multi-turn helical cylinder coil with dual straight cold-zone legs
Mounting Interface Dual threaded hex bulkhead fittings with washers and locking nuts
Sheath Material Corrosion-resistant SUS304 / SUS316L Stainless Steel or Incoloy 800
Internal Resistance Core High-grade NiCr 80/20 resistance alloy wire
Insulation Core High-density compacted Magnesium Oxide (MgO) powder
Terminal Assembly Threaded terminal studs with ceramic/silicone moisture seals and nuts
Insulation Resistance Cold insulation resistance ≥100MΩ at 500V DC
Dielectric Withstand

1500V AC / 1 min (Cold state)

Cylindrical Spiral Coil Tubular Heating Element For Tank

 

Features

  • High-Density Helical Coil Geometry: Multi-turn cylindrical winding packs an extended active heating length into a short axial footprint, maximizing heat exchange surface area inside compact tanks and cylindrical chambers.
  • Dual Threaded Bulkhead Mounting: Integrated hex fittings with clamping nuts and washers allow straightforward installation through tank walls or manifold plates while maintaining a reliable mechanical seal.
  • Moisture-Sealed Terminal Ends: Fitted with insulated terminal bushings and threaded M4/M5 studs to resist humidity ingress and ensure vibration-resistant power wiring.
  • Balanced Radial Heat Distribution: Open helical spacing promotes natural convective circulation around every coil turn, reducing localized film boiling and scaling in liquid media.
  • Custom OEM Dimensional Flexibility: Coil inner/outer diameter, pitch spacing, number of turns, leg exit angles, and thread specifications (metric, BSP, or NPT) are tailored to exact customer drawings.

 

Applications & Engineering Guidelines

  • Liquid Tanks & Cylindrical Chambers: Widely utilized in commercial water boilers, distillation units, CIP cleaning tanks, oil reservoirs, laboratory baths, and cylindrical air or gas heating ducts.
  • Bulkhead Sealing & Torquing: Install compatible high-temperature elastomer or PTFE sealing washers on the fluid side of the tank wall. Tighten the hex bulkhead nuts evenly with a wrench without twisting or bending the cold-zone tubes.
  • Liquid Submersion & Flow Requirements: When operating in liquid media, keep the entire helical heated section fully submerged at all times to prevent dry-firing. For air or gas heating applications, verify adequate airflow velocity across the coil turns to keep sheath temperatures within alloy limits.
  • Periodic Scale Inspection: In hard-water or high-mineral solutions, inspect the coil spacing periodically and remove scale deposits to prevent heat trapping between adjacent turns.

 

Company profile

Yancheng Hongtai Alloy Electric Apparatus Co., Ltd. is a professional heating element manufacturer established in 2008, specializing in rod heaters, band heaters, and infrared heaters. The company employs 10 experienced engineers and uses advanced machinery from Taiwan, Japan, and Germany. It holds CE and ROHS certifications and adheres to ISO 9001 ,CQC,CE,ROHS certifications standards for quality control.

Main products : cartridge heater,Tubular heater, Flexible heater, Infrared heater,silicone heater ,thermocouple, heating element,Plate Heater and other heating products. The factory introduced advanced automatic control system and online quality,inspection system to ensure the stability and reliability of product quality.

Hongtai Heater Factory Company overview

 

Hongtai Heater Factory Certification

Hongtai Heater Factory profile

 

Hongtai Heater Factory Trade show participation

​

Hongtai Heater Factory Packaging shipping specifications

 

Hot Tags: 220v 380v spiral coil tubular heater element with thread, China, suppliers, manufacturers, factory, wholesale, price