In some homes or offices, Put furniture in front of the finned tube.As a result of the arrangement of furniture, the finned tubes are surrounded by Convection in the air is hindered, and the radiant heat emitted by the finned tubes is also obscured by furniture. Therefore, despite the high temperature of the finned tube, the heat of the finned tube is not easily distributed to the interior, and the dried furniture is baked to make the wood twisted and cracked. Since the outdoor temperature is low, the amount of indoor heat radiation must be radiated to the outside. The amount of heat obtained in the room must be balanced with the amount of heat distributed outside the room, and thus the indoor temperature may be affected. Therefore, it is recommended that home furnishings interfere with the heat dissipation of finned tubes, especially for low-temperature homes in winter. Please relocate the furniture and move the furniture near the finned tube to make the finned tubes really work. To the cooling effect.
The finned tubes are generally installed against the wall, and most of them are installed on the outer wall. After the finned tubes are connected, the part of the wall that is close to the finned tube is heated, ie, the inner surface temperature of the wall near the finned tube. The internal surface temperature of the wall is higher than that of other parts of the wall. Therefore, this part of the wall has more heat to transmit and dissipate than other walls.