Introduction of Carbon Fiber Quartz Infrared Tube Heaters:
Full braided carbon fiber heating element is a pure black body material, so it has advantages including a rapid warming, heat lag is small, uniform heat, heat radiation transmission distance, heat exchange speed and so on. In the working process, its luminous flux is much smaller than that of the metal heating element. Its electrothermal conversion efficiency is up to 98% even more. After turn on the power, the heating rate is surprisingly fast. You will feel that its body has been hot in 1 to 2 seconds, and the surface temperature will be up to 300-700 degrees after 5 seconds.
Its energy emission is mainly far-infrared radiation. The far infrared wavelengths it emits is between 8 μm and 14 μm. The far-infrared spectrum of this wavelength is called "the light of life", accounting for more than 80% of the overall wavelength. At the same time, it can be absorbed by the water molecules in the air to produce resonance friction heat effect, which can achieve a rapid increase in the role of heating ambient temperature.
For carbon fiber infrared quartz tube heater, its lifetime is ≥ 6000 hours (continuous burning). Understand the working situation that the frequent start, shut down and long-term continuous work, the heating body is without oxidation and breakdown phenomenon. And hot light color is uniform. The inside and outside of the tube is clean.
Unlike metal heating elements, it completely avoids the generation of electromagnetic fields.
This product's cover material uses high purity dehydroxy quartz glass tube, which thermal expansion coefficient is very small and with high thermal stability. It can withstand severe temperature changes without bursting (Quartz tube heated to 1500 ℃, the rapid input of 20 ℃ water, it does not burst).
Quartz glass tube is a good acid resistant material (except hydrofluoric acid). Its acid resistance is 30 times higher than ceramic maetrial and 150 times higher than the stainless steel (nickel-chromium alloy).
