Easy-to-install and remove with Velcro™ like fastener
Moisture and chemical resistant
Uniform heat across surface of beaker
Hook and loop closure allows for quick installation and removal
Dielectric strength of over 2000V
Power density: 5.0 watts/in.2 (0.008 watts/mm2)
Long power leads, 2 ft. (61cm) with 120VAC: Standard 2-prong plug (NEMA 1-15)
Voltage: 120V
Easy programming (°C or °F)
Temperature control range: 0° to 600°C or 32° to 999°F; Accuracy: ±0.6% of span, ±1 digit
Exposure temperature: 0° to 50°C (32° to 122°F); Humidity: 80%, non-condensing
Built-in J type thermocouple; 5 ft. (1.5m) long
Upper and lower limits of setpoint can be adjusted
Set-point value can be adjusted by using single key
Hysteresis adjustable between 1 and 20 degrees
Input power cord, 5 ft. (1.5m) for 120VAC unit: NEMA 5-15 plug
Output power cord, 5 ft. (1.5m) for 120VAC unit: NEMA 5-15R receptacle
Heater and controller are CE approved.
Hot Tags: electric fluid silicone rubber beaker heater, China, suppliers, manufacturers, factory, wholesale, price
