High Temp Stainless Steel Nozzle Mica Band Heater

High Temp Stainless Steel Nozzle Mica Band Heater

This high-temperature stainless steel nozzle mica band heater delivers fast, uniform conductive heat transfer for injection molding machine nozzles, extrusion barrels, and cylindrical dies, featuring rugged clamping hardware and versatile terminal enclosures for continuous industrial duty.
Send Inquiry
Description

With 20 years experience, Hongtai Alloy is your trusted source for quality high temp stainless steel nozzle mica band heater as one of the leading suppliers of various heaters in China. Providing you with the most competitive price, we welcome you to buy the heater from our factory.

 

Product Description

Engineered specifically for tight-clearance cylindrical heating zones, the High Temp Stainless Steel Nozzle Mica Band Heater combines a rust-resistant stainless steel outer sheath with high-dielectric muscovite or phlogopite mica insulation and precision-wound Nickel-Chromium resistance ribbon. Its low-mass, thin-wall profile heats up rapidly and transfers thermal energy directly into the nozzle or barrel wall via intimate surface conduction. Available with bent-up flange bolts, barrel-nut clamping straps, ceramic terminal blocks, post terminals, or high-temperature two-pin armored plugs, these band heaters resist plastic drool contamination and mechanical vibration across demanding polymer processing lines.

220V Mica Band Heater For Plastic Injection Molding

 

Date sheets

Parameter Specification
Model / Part Number HT-MBH-SS-NOZZLE
Operating Voltage 110V AC / 220V AC / 230V AC / 380V AC (Custom voltages available)
Power Rating Custom engineered based on nozzle diameter, width, and watt density
Wattage Tolerance +5% / -10% (Per industrial manufacturing standards)
Max Operating Temperature Up to 350°C (662°F) with Muscovite mica; up to 450°C (842°F) with Phlogopite mica
Sheath Material Rust-resistant SUS304 / SUS321 Stainless Steel
Resistance Element Precision-wound NiCr 80/20 flat resistance ribbon
Clamping Mechanism Bent-up flanges with tightening screws, barrel nuts, or full clamping straps
Termination Options Ceramic terminal blocks (open or boxed), screw post terminals, or 2-pin high-temp plugs
Custom Cutouts Precision holes, notches, and slots for thermocouples or nozzle obstructions
Insulation Resistance Cold insulation resistance ≥100MΩ at 500V DC
Dielectric Withstand

1500V AC / 1 min (Cold state)

Barrel Band Heating Element With Ceramic Post Terminals

 

Features

  • Rapid Conduction & Low Thermal Mass: Thin-wall stainless steel and mica construction minimizes thermal inertia, enabling fast heat-up cycles and responsive PID temperature control on injection nozzles.
  • High-Retention Clamping Hardware: Equipped with heavy-duty bent-up flanges, tightening bolts, or low-profile clamping bands that maintain firm radial contact throughout thermal expansion and contraction cycles.
  • Versatile Industrial Terminations: Configurable with ventilated protective terminal boxes, ceramic terminal blocks, threaded post studs, or quick-disconnect two-pin plugs to match existing machine wiring harnesses.
  • Contamination-Resistant Sheath: Smooth, tightly sealed stainless steel housing helps shield the internal mica core against molten polymer drool, oil mist, and mechanical abrasion.
  • Tailored Geometry & Cutouts: Manufactured to exact inner diameters and widths (one-piece or two-piece expandable designs), with custom holes or slots machined to accommodate temperature sensors and mounting pins.

 

Applications

Polymer & Packaging Machinery: Widely installed on plastic injection molding nozzles, extruder barrels, blow-molding heads, hot-runner bushings, and packaging heat-seal cylinders.

Surface Preparation & Seating: Before clamping the heater onto the nozzle or barrel, remove any carbonized resin, rust, or burrs from the metal surface. Air gaps caused by surface debris act as thermal insulators and will cause localized overheating.

Hot-Torquing Procedure: Tighten clamping bolts firmly at room temperature, energize the heater until it reaches approximately half of its operating temperature, de-energize, and re-torque the clamping screws to compensate for initial thermal expansion.

Terminal & Lead Protection: Shield electrical terminals and lead exits from molten plastic overflow, hydraulic oil leaks, and sharp flexing near moving platen carriages.

 

Company profile

Yancheng Hongtai Alloy Electric Apparatus Co., Ltd. is a professional heating element manufacturer established in 2008, specializing in rod heaters, band heaters, and infrared heaters. The company employs 10 experienced engineers and uses advanced machinery from Taiwan, Japan, and Germany. It holds CE and ROHS certifications and adheres to ISO 9001 ,CQC,CE,ROHS certifications standards for quality control.

Main products : cartridge heater,Tubular heater, Flexible heater, Infrared heater,silicone heater ,thermocouple, heating element, and other heating products. The factory introduced advanced automatic control system and online quality,inspection system to ensure the stability and reliability of product quality.

Hongtai Heater Factory Company overview

 

Hongtai Heater Factory Certification

Hongtai Heater Factory profile

 

Hongtai Heater Factory Trade show participation

Hongtai Heater Factory Packaging shipping specifications

​

 

Hot Tags: high temp stainless steel nozzle mica band heater, China, suppliers, manufacturers, factory, wholesale, price