Monel 400 bright Nickel Copper Alloy Pipe
Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
CHEMICAL COMPOSITION % | ||||||
C | Cu | Ni | Fe | Mn | Si | S |
≤0.30 | 28.0∼34.0 | ≥63.0 | ≤2.5 | ≤2.0 | ≤0.5 | ≤0.024 |
DENSITY | 8.8 g/cm3 | 0.318 lb/in3 |
MELTING POINT | 1350oC | 2460oF |
COEFFICIENT OF EXPANSION | 13.9 µm/m °C | 7.7 x 10-6 in/in °F |
MODULUS OF RIGIDITY | 65.3 kN/m2 | 9471 ksi |
MODULUS OF ELASTICITY | 173 kN/m2 | 25092 ksi |
Wire: 0.01-10mm
Ribbons: 0.05*0.2-2.0*6.0mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Hot Tags: monel 400 bright nickel copper alloy pipe, China, suppliers, manufacturers, factory, wholesale, price
